iPad Pro 11-inch (1st generation) model numbers
A model number identifies the model or hardware version and is shared by many devices. Your serial number identifies your individual device; cellular versions also have an IMEI.
Where to find your model number
- Open Settings, then General, then About.
- At Model Number, tap the displayed part number to reveal the A-number.
- Match the A-number to the Wi-Fi or cellular variant below; Model Name alone does not identify every regional radio version.
If the iPad will not turn on: Check the small model number printed on the back of the iPad. Use good lighting; do not open the device.
All 4 A-numbers listed for iPad Pro 11-inch (1st generation) in Apple’s identification guide and verified regional technical specifications, checked 20 November 2026. Wi-Fi and cellular variants share this model page; China, radio and other regional distinctions are retained where Apple states them.
Swipe the table sideways on a narrow screen.
| Model number | Version or region | Useful detail |
|---|---|---|
| A1980 | Wi-Fi | A1980 on the iPad Pro |
| A2013 | Wi-Fi + Cellular | A2013, A1934 on the iPad Pro Wi-Fi + Cellular; Apple does not assign a complete country-by-country mapping in the identification entry. |
| A1934 | Wi-Fi + Cellular | A2013, A1934 on the iPad Pro Wi-Fi + Cellular; Apple does not assign a complete country-by-country mapping in the identification entry. |
| A1979 | Wi-Fi + Cellular — China mainland | A1979 on the iPad Pro Wi-Fi + Cellular (China mainland only) |
All 2 standard colours
These are the original manufacturer finishes listed for this model, including documented later colours. Availability varied over time and by market.
- Silver
Black front bezel. Colour swatch is approximate; lighting and screen settings affect appearance.
- Space Grey
Black front bezel. Colour swatch is approximate; lighting and screen settings affect appearance.
Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.
Getting to know the iPad Pro 11-inch (1st generation)
The first 11-inch Pro
Apple introduced the 11-inch Pro in 2018 with A12X Bionic, Face ID and a 2388 × 1668 Liquid Retina display. Its flat-sided body and gesture-based front replace the Home-button layout of the earlier 10.5-inch Pro.
Recognise the original rear camera
This model has one 12MP rear camera and flash. It does not have the square Wide/Ultra Wide/LiDAR module of the next 11-inch generation. A 7MP TrueDepth front camera provides Face ID and front-facing photography.
USB-C changes the accessory connection
The tablet charges through USB-C and works with Apple Pencil (2nd generation) or Apple Pencil (USB-C). The original storage choices run from 64GB to 1TB. Match the exact 11-inch generation when choosing a fitted case or a replacement display.
Specifications and what they mean
Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.
Swipe the table sideways on a narrow screen.
| Feature | iPad Pro 11-inch (1st generation) | What it means |
|---|---|---|
| Screen | 11-inch LCD (Liquid Retina) | The diagonal size describes the screen, not the outside width of the tablet. |
| Resolution | 2388 × 1668 pixels; 264 ppi | Pixel count describes image detail; ppi describes how tightly pixels are packed. |
| Processor | A12X Bionic | The chip runs applications and graphics; individual software decides which capabilities it uses. |
| Storage | 64GB, 256GB, 512GB and 1TB | Apple-listed capacity options across this model’s life; usable space is lower after software and formatting. |
| Body size | 247.6 × 178.5 × 5.9 mm | Height × width × depth before adding a case. |
| Weight | 468 g Wi-Fi; 468 g cellular | The radio hardware can change weight; these are Apple’s listed device weights. |
| Rear camera | 12MP Wide | The rear camera is used for photographs, video and compatible document-scanning functions. |
| Front camera | 7MP TrueDepth | The front camera is the one facing you during a call. |
| Charging and wired connection | USB-C | Use a compatible cable and power adapter. Data speed depends on the cable, accessory and connection mode. |
| Apple Pencil | Apple Pencil (2nd generation) and Apple Pencil (USB-C) | Pencil models are not interchangeable; a compatible software version may be required. |
| Authentication | Face ID | Face ID uses facial recognition; Touch ID reads a fingerprint. |
| Wireless connections | Wi-Fi 5 (802.11ac); Bluetooth 5.0 | Wi-Fi needs a suitable network; Bluetooth connects compatible accessories. |
| Mobile data | LTE on cellular models; bands vary by A-code | Wi-Fi-only hardware has no cellular modem. Coverage, plan, network support and regional bands all matter. |
| Apple battery test | Up to 10 hours of web browsing on Wi-Fi or video | A manufacturer test claim for a new battery; real runtime depends on usage, settings, age and condition. |
| Current major software compatibility | Not listed for iPadOS 27 | Checked on 20 November 2026; feature availability is separate from basic operating-system compatibility. |
Software and security updates
iPad Pro 11-inch (1st generation) is not on Apple’s iPadOS 27 compatibility list, checked on 20 November 2026. Check Settings > General > Software Update for the software offered to this model, and check individual app requirements before relying on an older tablet.
Common questions about the iPad Pro 11-inch (1st generation)
Which Apple Pencil works with iPad Pro 11-inch (1st generation)?
iPad Pro 11-inch (1st generation) works with Apple Pencil (2nd generation) and Apple Pencil (USB-C). Choose the exact Pencil version and check the software requirements before buying.
Which charging connector does iPad Pro 11-inch (1st generation) use?
iPad Pro 11-inch (1st generation) has a USB-C connector. Choose a cable with that connector at the iPad end and a power-adapter connection that matches your charger.
Does iPad Pro 11-inch (1st generation) have Face ID or Touch ID?
iPad Pro 11-inch (1st generation) uses Face ID and has no Home button. Its facial-recognition hardware is part of the front TrueDepth camera system.
Can iPad Pro 11-inch (1st generation) run iPadOS 27?
iPad Pro 11-inch (1st generation) is not on Apple’s iPadOS 27 compatibility list, checked on 20 November 2026. Check Settings > General > Software Update for the software offered to this model, and check individual app requirements before relying on an older tablet.
About this guide
Manufacturer information checked 20 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.
