About Apple. Apple Watch includes original, Series, SE and Ultra generations. Match the case size, material and GPS or cellular A-number when identifying hardware.

All Apple Watches
Apple Watch (original) · Introduced 2015

Apple Watch 38mm (1st generation, 2015)

This guide covers the stainless steel version in the 38mm case size. The original Apple Watch arrived in 2015. Its compact rectangular case has a Digital Crown, a separate side button and a rear optical heart sensor. It relies on the paired iPhone for GPS location and has no cellular modem.

UK & Ireland model numbers
A1553

Compare all listed model codes below.

Case
38mm
Material
Stainless Steel
Connection
No cellular radio

By WeSolveAll · Specifications checked 21 November 2026

Identify your watch

Watch 38mm (1st generation, 2015) model numbers

A model number identifies the model or hardware version and is shared by many devices. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model number

  1. On the paired iPhone, open the Watch app and choose My Watch → General → About.
  2. Tap Model Number so the M-prefixed sales part number changes to the A-prefixed hardware number.
  3. Compare the full A-number and read the case size and material engraving on the watch back. Keep the individual serial number separate.

If the watch will not turn on: Check the original box or purchase record and the watch’s rear case engraving for generation, size and material. The serial number is not the model number; do not open the sealed watch just to identify it.

A-numbers verified against Apple’s identification guide. Entries distinguish case size, GPS/cellular hardware and listed markets. One A-number can span several case materials or branded editions; also check the engraving.

Swipe the table sideways on a narrow screen.

Model numberCase size or versionUseful detail
A155338mm • No cellular radio • Apple-listed model; no separate regional suffixMatch this code to the number on your watch.

The M-prefixed part number describes a sales configuration. The A-number identifies a hardware variant, while the serial number identifies one watch. A different strap does not change the A-number.

Recognise the finish

2 recorded colours

Original case finishes for this material and generation; interchangeable band colours are not case colours.

  • Stainless Steel

    Approximate on-screen case swatch; band colour, lighting, wear and replacement housings can change appearance.

  • Space Black

    Approximate on-screen case swatch; band colour, lighting, wear and replacement housings can change appearance.

Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Watch 38mm (1st generation, 2015)

What identifies this generation

The original Apple Watch arrived in 2015. Its compact rectangular case has a Digital Crown, a separate side button and a rear optical heart sensor. It relies on the paired iPhone for GPS location and has no cellular modem.

Case, glass and original finishes

This guide covers the stainless steel version in the 38mm case size. The front cover is sapphire crystal, with a ceramic or ceramic-and-sapphire sensor back. Case finishes are listed separately from straps, which can be changed. The A-number identifies the size and radio hardware, but can be shared across case materials; also read the back engraving before choosing a screen or housing. This 2015 model is sometimes called Series 0, but Apple calls it the first generation; Series 1 is a later 2016 watch.

Charging and mobile connections

This generation charges through an Apple Watch magnetic charging puck and has no fast-charge mode. Test a suspected charging fault with compatible equipment known to work. A generic wireless phone pad is not a substitute for a charger specified for Apple Watch. Available connection versions are wi-fi and bluetooth; no built-in gps. Calls or online notifications depend on the paired iPhone or supported Wi-Fi functions; no update can add a cellular modem.

iPhone pairing and software

Apple’s generation compatibility table records iPhone 5 or later with iOS 8.2 or later. That is a baseline for this generation, not a guarantee for every later watchOS installation. Check both the watchOS version and iPhone software before resetting or buying a used watch. Apple’s compatibility table lists watchOS 1 through watchOS 4.3.2.

Checks before and after a repair

Before and after a repair, record the display image and touch response, Crown rotation and press, side button, speaker, microphone, charging and pairing. Inspect the sensor cover and strap-release mechanisms. On this generation, a screen that sleeps between interactions is normal; check whether it wakes and responds reliably. Confirm the backup and account handover arrangements before a reset. Opening a watch can affect its seals, so the original water rating does not establish its condition after repair.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeatureWatch 38mm (1st generation, 2015)What it means
Introduced2015The generation’s first release year; later case finishes can have a different introduction date.
Case sizes38mmCase size is not the screen diagonal. Match the size, generation and material together.
Case materialStainless SteelThe model number can be shared by more than one material. Check the case engraving as well.
Body dimensions38mm version: 38.6 × 33.3 × 10.5 mmHeight × width × depth, excluding a strap; use the entry for the exact case version.
DisplayRetina OLEDAlways-On means a supported watch face can remain dimly visible between interactions; settings can switch it off.
Resolution38mm: 272 × 340 pixelsPixel dimensions vary with case size and do not establish screen-part compatibility.
Front coverSapphire crystalThis describes the original cover material for the case family; replacement parts may differ.
Published brightness450 nitsThe stated brightness is a display specification, not a measurement of a worn or repaired screen.
ProcessorApple S1The system-in-package identifies the processing generation; it is not a user-upgradable part.
Storage8GBBuilt-in capacity before the operating system, apps and media; these watches do not accept a memory card.
Wi-Fi and Bluetooth2.4GHz 802.11b/g/n; Bluetooth 4.0Pairing and network functions also depend on phone software and service availability.
Connection versionsWi-Fi and Bluetooth; no built-in GPSGPS + Cellular identifies modem-equipped hardware. A compatible operator and plan are needed for mobile service.
Mobile networkNo cellular radioCheck regional radio hardware and network support, especially for imported watches.
ChargingApple Watch magnetic charging; no fast-charge modeCharging speed depends on the puck, adapter, temperature, battery level and use; it is not guaranteed after repair.
Published battery lifeUp to 18 hours in Apple’s normal-use testA new-device test result, not a forecast for an older battery or a continuous workout.
Sensor hardwareOptical heart sensor; accelerometer; gyroscope; ambient-light sensorPresence of hardware does not guarantee every related app or feature in every region.
Original protection ratingIPX7 splash-resistance rating when newRatings describe tested new hardware. Wear, damage and opening the case can reduce protection.
Software at introductionwatchOS 1The installed version may be newer. See the compatibility note before pairing or resetting.
Pairing baselineiPhone 5 or later with iOS 8.2 or laterApple’s generation table; later watchOS versions can require a newer iPhone and iOS.

Read our guide to common device terms

Software and service compatibility

Apple’s compatibility table lists watchOS 1 through watchOS 4.3.2. Compatibility checked on 21 November 2026; availability of a software version is separate from a repair warranty.

Common questions about the Watch 38mm (1st generation, 2015)

How do I identify my Watch 38mm (1st generation, 2015)?

In the iPhone Watch app, open My Watch → General → About and tap Model Number to switch the M-prefixed part number to the A-prefixed hardware number. The references for this guide are A1553. Match the case size and material engraving too.

Does this Watch (1st generation) have an Always-On display?

No. This generation does not have an Always-On display. Its screen can sleep between interactions and wake when requested; that behaviour alone does not indicate a faulty display.

Which iPhone can pair with this watch?

Apple’s generation compatibility table records iPhone 5 or later with iOS 8.2 or later. That is a baseline for this generation, not a guarantee for every later watchOS installation. Check both the watchOS version and iPhone software before resetting or buying a used watch. Apple’s compatibility table lists watchOS 1 through watchOS 4.3.2.

Which case colours belong to this model?

The case finishes recorded here are Stainless Steel, Space Black. Straps are replaceable, so strap colour does not identify the case or its hardware model. Hermès editions are distinguished by their branding and available finish; a Hermès strap fitted later does not make a standard watch a Hermès edition.

Does the original water-resistance rating still apply after repair?

The original rating describes the design when tested as new. Damage, ageing seals or opening the case can change its resistance to liquid. Ask the repairer what sealing work and checks were completed before using the watch around water. A working display does not prove that the case is sealed.

About this guide

Device details checked 21 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring