About Apple. Apple Watch includes original, Series, SE and Ultra generations. Match the case size, material and GPS or cellular A-number when identifying hardware.

All Apple Watches
Apple Watch Series · Introduced 2024

Apple Watch Series 10 Aluminium

This guide covers the aluminium version, offered in 42mm and 46mm case sizes. Series 10 introduced thinner 42mm and 46mm cases and a wide-angle OLED screen. A depth gauge and water-temperature sensor are part of its hardware specification. The modern 42mm case is a different generation from the 42mm watches introduced in 2015–2017.

UK & Ireland model numbers
A2997A2999A3001A3003

Compare all listed model codes below.

Case
42mm and 46mm
Material
Aluminium
Connection
GPS / Cellular options

By WeSolveAll · Specifications checked 21 November 2026

Identify your watch

Watch Series 10 Aluminium model numbers

A model number identifies the model or hardware version and is shared by many devices. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model number

  1. On the paired iPhone, open the Watch app and choose My Watch → General → About.
  2. Tap Model Number so the M-prefixed sales part number changes to the A-prefixed hardware number.
  3. Compare the full A-number and read the case size and material engraving on the watch back. Keep the individual serial number separate.

If the watch will not turn on: Check the original box or purchase record and the watch’s rear case engraving for generation, size and material. The serial number is not the model number; do not open the sealed watch just to identify it.

A-numbers verified against Apple’s identification guide. Entries distinguish case size, GPS/cellular hardware and listed markets. One A-number can span several case materials or branded editions; also check the engraving.

Swipe the table sideways on a narrow screen.

Model numberCase size or versionUseful detail
A299742mm • GPS • North America, Europe, Asia PacificMatch this code to the number on your watch.
A299842mm • GPS • China mainland, IndonesiaMatch this code to the number on your watch.
A299946mm • GPS • North America, Europe, Asia PacificMatch this code to the number on your watch.
A300046mm • GPS • China mainland, IndonesiaMatch this code to the number on your watch.
A300142mm • GPS + Cellular • North America, Europe, Asia PacificMatch this code to the number on your watch.
A300242mm • GPS + Cellular • China mainlandMatch this code to the number on your watch.
A300346mm • GPS + Cellular • North America, Europe, Asia PacificMatch this code to the number on your watch.
A320646mm • GPS + Cellular • China mainlandMatch this code to the number on your watch.

The M-prefixed part number describes a sales configuration. The A-number identifies a hardware variant, while the serial number identifies one watch. A different strap does not change the A-number.

Recognise the finish

3 recorded colours

Original case finishes for this material and generation; interchangeable band colours are not case colours.

  • Jet Black

    Approximate on-screen case swatch; band colour, lighting, wear and replacement housings can change appearance.

  • Rose Gold

    Approximate on-screen case swatch; band colour, lighting, wear and replacement housings can change appearance.

  • Silver

    Approximate on-screen case swatch; band colour, lighting, wear and replacement housings can change appearance.

Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Watch Series 10 Aluminium

What identifies this generation

Series 10 introduced thinner 42mm and 46mm cases and a wide-angle OLED screen. A depth gauge and water-temperature sensor are part of its hardware specification. The modern 42mm case is a different generation from the 42mm watches introduced in 2015–2017.

Case, glass and original finishes

This guide covers the aluminium version, offered in 42mm and 46mm case sizes. The front cover is ion-x glass, with a aluminium back. Case finishes are listed separately from straps, which can be changed. The A-number identifies the size and radio hardware, but can be shared across case materials; also read the back engraving before choosing a screen or housing. A 42mm label on this generation does not make it the same watch as an earlier 42mm Series 2 or Series 3.

Charging and mobile connections

This generation supports fast charging, with Apple quoting roughly 30 minutes from an empty battery to 80% under its test conditions. Use a compatible Apple Watch USB-C magnetic fast-charge cable and suitable USB-PD adapter. A USB-C plug alone does not establish that a charging puck supports the faster mode. Available connection versions are gps and gps + cellular versions. Cellular service needs a compatible local network plan and the correct regional hardware; the presence of a modem does not include a subscription.

iPhone pairing and software

Apple’s generation compatibility table records iPhone XS or later with iOS 18 or later. That is a baseline for this generation, not a guarantee for every later watchOS installation. Check both the watchOS version and iPhone software before resetting or buying a used watch. Apple lists Series 10 as compatible with watchOS 27. That update requires iPhone 11 or later, or iPhone SE (2nd generation or later), with iOS 27.

Checks before and after a repair

Before and after a repair, record the display image and touch response, Crown rotation and press, side button, speaker, microphone, charging and pairing. Inspect the sensor cover and strap-release mechanisms, and distinguish a dim Always-On screen from missing pixels or failed touch input. Confirm the backup and account handover arrangements before a reset. Opening a watch can affect its seals, so the original water rating does not establish its condition after repair.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeatureWatch Series 10 AluminiumWhat it means
Introduced2024The generation’s first release year; later case finishes can have a different introduction date.
Case sizes42mm and 46mmCase size is not the screen diagonal. Match the size, generation and material together.
Case materialAluminiumThe model number can be shared by more than one material. Check the case engraving as well.
Body dimensions42mm version: 42 × 36 × 9.7 mm; 46mm version: 46 × 39 × 9.7 mmHeight × width × depth, excluding a strap; use the entry for the exact case version.
DisplayAlways-On Retina LTPO3 wide-angle OLEDAlways-On means a supported watch face can remain dimly visible between interactions; settings can switch it off.
Resolution42mm: 374 × 446 pixels; 46mm: 416 × 496 pixelsPixel dimensions vary with case size and do not establish screen-part compatibility.
Front coverIon-X glassThis describes the original cover material for the case family; replacement parts may differ.
Published brightness2,000 nits maximum; 1 nit minimumThe stated brightness is a display specification, not a measurement of a worn or repaired screen.
ProcessorApple S10 dual-coreThe system-in-package identifies the processing generation; it is not a user-upgradable part.
Storage64GBBuilt-in capacity before the operating system, apps and media; these watches do not accept a memory card.
Wi-Fi and Bluetooth2.4GHz and 5GHz 802.11n; Bluetooth 5.3Pairing and network functions also depend on phone software and service availability.
Connection versionsGPS and GPS + Cellular versionsGPS + Cellular identifies modem-equipped hardware. A compatible operator and plan are needed for mobile service.
Mobile networkLTE/UMTS on cellular modelsCheck regional radio hardware and network support, especially for imported watches.
ChargingMagnetic charging; fast-charge capable (about 0–80% in 30 minutes under Apple test conditions)Charging speed depends on the puck, adapter, temperature, battery level and use; it is not guaranteed after repair.
Published battery lifeUp to 18 hours in Apple’s normal-use testA new-device test result, not a forecast for an older battery or a continuous workout.
Sensor hardwareElectrical and optical heart sensors; temperature and blood-oxygen sensor hardware; depth gauge; water-temperature sensor; compass; altimeterPresence of hardware does not guarantee every related app or feature in every region.
Original protection rating50m water-resistance rating; IP6X dust ratingRatings describe tested new hardware. Wear, damage and opening the case can reduce protection.
Software at introductionwatchOS 11The installed version may be newer. See the compatibility note before pairing or resetting.
Pairing baselineiPhone XS or later with iOS 18 or laterApple’s generation table; later watchOS versions can require a newer iPhone and iOS.

Read our guide to common device terms

Software and service compatibility

Apple lists Series 10 as compatible with watchOS 27. That update requires iPhone 11 or later, or iPhone SE (2nd generation or later), with iOS 27. Compatibility checked on 21 November 2026; availability of a software version is separate from a repair warranty.

Common questions about the Watch Series 10 Aluminium

How do I identify my Watch Series 10 Aluminium?

In the iPhone Watch app, open My Watch → General → About and tap Model Number to switch the M-prefixed part number to the A-prefixed hardware number. The references for this guide are A2997, A2998, A2999, A3000, A3001, A3002, A3003, A3206. Match the case size and material engraving too.

Does this Watch Series 10 have an Always-On display?

Yes. This generation supports an Always-On display, although settings and modes can turn it off. A dim watch face at rest is different from failed pixels, a cracked cover or unresponsive touch.

Which iPhone can pair with this watch?

Apple’s generation compatibility table records iPhone XS or later with iOS 18 or later. That is a baseline for this generation, not a guarantee for every later watchOS installation. Check both the watchOS version and iPhone software before resetting or buying a used watch. Apple lists Series 10 as compatible with watchOS 27. That update requires iPhone 11 or later, or iPhone SE (2nd generation or later), with iOS 27.

Which case colours belong to this model?

The case finishes recorded here are Jet Black, Rose Gold, Silver. Straps are replaceable, so strap colour does not identify the case or its hardware model.

Does the original water-resistance rating still apply after repair?

The original rating describes the design when tested as new. Damage, ageing seals or opening the case can change its resistance to liquid. Ask the repairer what sealing work and checks were completed before using the watch around water. A working display does not prove that the case is sealed.

About this guide

Device details checked 21 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring