About Motorola. Motorola phones, tablets and watches use different generations and regional versions. Keep the full name and hardware-code suffix when choosing parts or accessories.

Explore Moto 360
Moto 360 · Introduced 2014

Motorola Moto 360 (1st generation)

The original Moto 360 is the 2014 round smartwatch with a 46mm stainless-steel case and a small flat section at the bottom of the display. It uses a wireless charging dock and differs from both the 2015 second generation and the later 2019 third-generation design.

Model reference
Moto 360 (2014, first generation)

Compare all listed model references below.

Generation
2014 first generation
Case
46mm
Charging
Compatible wireless dock

By WeSolveAll · Specifications checked 22 November 2026

Identify your watch

Moto 360 (1st generation) model reference

A model reference identifies the recorded model. The complete marking on a device can include an additional hardware prefix or regional suffix. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model reference

  1. On the watch, open Settings and look for About, System or regulatory information; record the complete model name and any hardware code shown.
  2. Compare the case size, button layout and charging contacts with this guide, then check the original box or purchase record.
  3. Keep a serial number, Bluetooth address or cellular IMEI private; these identify an individual watch rather than its model.

If the watch will not turn on: Check the visible rear or case markings, original box and purchase record without opening the watch. Record the case and charging arrangement; a replacement band or watch face can change its appearance.

Full hardware codes are retained. Imported devices may use a different regional version; a listed code does not establish current UK or Irish network compatibility.

Swipe the table sideways on a narrow screen.

Model referenceReference scopeUseful detail
Moto 360 (2014, first generation)Model reference; availability varied by marketMatch the complete model marking. This is not the unique serial number of an individual device.

A retail SKU can describe storage, colour or an accessory bundle. It is distinct from a hardware model number, serial number or IMEI.

Recognise the finish

3 recorded colours

Original case colours are listed separately from interchangeable bands and accessories. Availability varied by market and sales period.

  • Natural Metal

    Silver-coloured steel case; original bands varied.

  • Dark Metal

    Dark steel case; a replaceable black band is a separate component.

  • Champagne Metal

    Gold-coloured steel case; do not confuse band finish with case finish.

Use the colour and the model reference together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Moto 360 (1st generation)

Display, body and identification

A single side button and the flat lower display section are useful first-generation clues. The band enters beneath the round case rather than using the more prominent external lugs of the second generation. Keep the 2014 generation with the model name when describing a broken screen or rear cover.

Power, connections and everyday use

The original specification lists a 1.56-inch LCD, 4GB storage, 512MB RAM and a 320mAh battery. Place the watch correctly in its compatible charging dock and check the charging indicator before diagnosing a battery fault. Its older Android Wear software and phone pairing are separate checks from whether it charges.

Checks before a repair

Record whether the watch powers on, charges with the correct cable or dock, responds to its controls and pairs through the correct app. Check the side button, lower edge of the display, rear sensor cover and fit in the charging dock. Do not assume a third-generation contact charger will work. Tell the repairer the exact model and fault so that availability of suitable parts can be checked.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeatureMoto 360 (1st generation)What it means
Introduced2014The hardware generation's introduction year; a later purchase date does not identify a different model.
Screen1.56 inch IPS LCDPanel size and technology help distinguish the device. The diagonal alone is not enough to choose a replacement screen.
Resolution320 × 290 pixels (~205 ppi density)The number of display pixels. Match the complete model and display assembly when checking a repair part.
ProcessorTI OMAP 3The main chipset identifies the hardware platform. A similarly named model can use a different board and software.
Storage and RAM4GB 512MB RAMStorage holds apps and files; RAM is working memory. Available storage is lower, and regional configurations can differ.
Launch softwareAndroid Wear OSThe software supplied at introduction, not a promise of the latest installed version or continuing update support.
Dimensions46 × 46 × 11.5 mmThe published body measurements help separate sizes and generations; screen diagonal and strap width are different measurements.
Weight49 gAn original published weight. Watch bands, cases and other accessories can change the weight of the device in hand.
MaterialsGlass front (Gorilla Glass 3), stainless steel framePublished case construction helps identify the device, but does not establish the condition or originality of a replacement housing.
BatteryLi-Ion 320 mAh, non-removableOriginal nominal or typical capacity where stated. Age, use and battery condition affect actual running time.
ChargingCompatible first-generation wireless charging dockUse compatible charging equipment for this model. Adapter output, device charging capability and actual charging speed are different figures.
Mobile connectionNo cellular connectionCheck the exact regional hardware and a network's current service before relying on a SIM or cellular feature.
Bluetooth4.0, LE, aptXBluetooth connects nearby devices. It does not by itself provide a mobile-data connection or confirm support for phone calls.
Wi-FiNoThe listed radio standard describes the original hardware; router settings and software compatibility also affect connection.
Water/dust ratingIP67A laboratory rating does not guarantee protection on an aged, damaged or repaired device. Ask about sealing checks after a repair.
Band fittingMatch the first-generation case attachment and compatible bandBand width is measured at the attachment and is separate from case diameter. Check the specific lug and fastening design.
Paired-phone softwareAndroid Wear-era companion software; verify current pairing supportUse the companion app named for this model. Current phone compatibility and app availability need checking before pairing an older watch.

Read our guide to common device terms

Software and service compatibility

This is an older Android Wear or Wear OS generation. Check its installed software and whether the appropriate companion app can still pair with the intended phone. Do this before a reset or repair, since an old watch can be physically sound while account sign-in or app compatibility is limited.

Common questions about the Moto 360 (1st generation)

How do I identify Motorola Moto 360 (1st generation)?

Read the model information in the watch's Settings or About screen and compare the complete marking with the original box or case. This is the 2014 first generation with one side button and the lower display cut-out. Moto 360 alone is not enough to distinguish later generations.

Does the first Moto 360 use the same charger as the 2019 model?

No. The 2014 watch uses a compatible wireless charging dock. The 2019 third generation uses its own contact charging cradle, so the shared Moto 360 name does not make the chargers interchangeable.

What should I check before repairing Motorola Moto 360 (1st generation)?

Record whether the watch powers on, charges with the correct cable or dock, responds to its controls and pairs through the correct app. Check the side button, lower edge of the display, rear sensor cover and fit in the charging dock. Do not assume a third-generation contact charger will work. Tell the repairer the exact model and fault so that availability of suitable parts can be checked.

What should I check about software on Motorola Moto 360 (1st generation)?

This is an older Android Wear or Wear OS generation. Check its installed software and whether the appropriate companion app can still pair with the intended phone. Do this before a reset or repair, since an old watch can be physically sound while account sign-in or app compatibility is limited.

About this guide

Device details checked 22 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring