About Google. Google’s Pixel and earlier Nexus ranges include distinct generations, sizes and hardware versions. Keep the complete name and model code when comparing a device.

Explore Pixel Watch
Pixel Watch · Introduced 2025

Google Pixel Watch 4

Pixel Watch 4 is the 2025 generation with a domed Actua 360 display and a new Quick Charge Dock. It uses the Snapdragon W5 Gen 2 platform. The 41 mm and 45 mm cases have different batteries and quoted running times, so size is part of identifying the device.

UK & Ireland model numbers
GHH4KGWSQ2G8AK3G1KAW

Compare all listed model codes below.

Case
41 mm or 45 mm aluminium
Storage
32GB
Charging
Quick Charge Dock

By WeSolveAll · Specifications checked 21 November 2026

Identify your watch

Pixel Watch 4 model numbers

A model number identifies the model or hardware version and is shared by many devices. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model number

  1. On the watch, open Settings → System → About and record the model information.
  2. Open Settings → System → Regulatory Information to check the hardware marking.
  3. Match the complete G-code and case size. Keep the serial number and any LTE IMEI private; they identify the individual watch.

If the watch will not turn on: Check the original box, purchase record and visible case markings. Do not open the watch merely to identify it. A band colour can change and is not a reliable generation identifier.

Codes are checked against Google’s regulatory declarations. The table distinguishes case size and Bluetooth/Wi-Fi or LTE hardware. UK and EU declarations establish the preferred regional codes; imported watches can carry another listed code.

Swipe the table sideways on a narrow screen.

Model numberCase size or versionUseful detail
GHH4K41 mm Bluetooth/Wi-FiKeep the case size and connection type with this code; it is not a unique serial number.
GWSQ241 mm LTEKeep the case size and connection type with this code; it is not a unique serial number.
G8AK345 mm Bluetooth/Wi-FiKeep the case size and connection type with this code; it is not a unique serial number.
G1KAW45 mm LTEKeep the case size and connection type with this code; it is not a unique serial number.

A retail order number, band choice, serial number and IMEI are different from the watch’s hardware model code.

Recognise the finish

4 recorded colours

These are original case finishes, not a list of every interchangeable strap. Notes record size restrictions and selected original band combinations. Colour availability varied by size, region and sales period.

  • Matte Black

    Both aluminium case sizes; Obsidian launch band. On-screen colour is approximate; a replacement band does not change the case finish.

  • Polished Silver

    Both case sizes; Porcelain band, with Iris also listed for 41 mm. On-screen colour is approximate; a replacement band does not change the case finish.

  • Champagne Gold

    41 mm aluminium case; Lemongrass launch band. On-screen colour is approximate; a replacement band does not change the case finish.

  • Satin Moonstone

    45 mm aluminium case; Moonstone launch band. On-screen colour is approximate; a replacement band does not change the case finish.

Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Pixel Watch 4

Screen, case and controls

The domed Actua 360 screen has an LTPO AMOLED panel with a published peak brightness of 3,000 nits. Both case sizes keep the crown and side button. For a damaged screen, record whether the image, touch or both have failed; the visible crack does not determine the full repair scope.

Charging and battery

Use the Quick Charge Dock specified for this generation and a suitable USB-C power adaptor. Google lists different full-charge times for the two cases: about 45 minutes for 41 mm and 60 minutes for 45 mm. The dock design is different from the earlier Pixel Watch 2 and 3 charging cable.

Checks before a repair

Record the case size, G-code and fault before choosing a repair route. Google documents a repairable architecture for this generation, but the part, service region and damage still determine the available repair. Ask the shop to assess screen, crown, charging contacts and rear sensor cover, and to explain its sealing checks after opening the case.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeaturePixel Watch 4What it means
Introduced2025The generation’s introduction year. The date of a later purchase does not create a new hardware generation.
Case sizes and material41 mm or 45 mm aluminiumCase size helps identify the hardware. A small or large wristband is a separate measurement.
Dimensions and weight41 mm: 31 g; 45 mm: 36.7 g; both 12.3 mm thick, without bandWeight excludes the band. Match the case size when checking a screen, rear cover or battery.
ScreenActua 360 LTPO AMOLED; 1–60Hz; up to 3,000 nitsPeak brightness is a test figure. It does not establish replacement-screen compatibility.
ProcessorQualcomm Snapdragon W5 Gen 2; Cortex-M55 co-processorThe main processor and co-processor perform different tasks. Similar watch names do not mean identical internals.
Storage32GBBuilt-in space for apps and downloaded content; usable capacity is lower.
Memory (RAM)2GBWorking memory for running software, separate from content storage.
Battery capacity41 mm: 325mAh; 45 mm: 455mAh, typicalOriginal typical capacity. Wear, charging history and settings affect the running time of a used watch.
Published battery lifeAlways-on: up to 30 hours (41 mm) or 40 hours (45 mm)Manufacturer test figures; enabled features, signal, temperature and battery age affect actual results.
Charging equipmentGoogle Pixel Watch Quick Charge DockUSB-C describes the power end of the cable. The watch connection must match the correct generation.
Published charging timeTo full: about 45 minutes for 41 mm; about 60 minutes for 45 mmApproximate test results with compatible equipment. These are not a diagnosis of battery condition.
Bluetooth and Wi-FiBluetooth 6.0; 2.4GHz and 5GHz Wi-FiNearby phone pairing and Wi-Fi are separate from an LTE mobile subscription.
Mobile networkBluetooth/Wi-Fi and LTE versions; eSIM on LTE hardwareA compatible network and service plan are required for cellular features. Confirm imported hardware with the operator.
Controls and audioRotating crown, side button, microphone and speakerTest the controls and audio separately when recording a fault.
Launch softwareWear OS 6.0This is the launch system, not a statement of the latest version installed on every watch.
Paired phoneCompatible Android 11.0 or newer; Google account and Pixel Watch appGoogle does not support pairing these watches with an iPhone. Check app and regional requirements for the intended phone.
Published water/dust rating5ATM and IP68A rating describes controlled tests. Age, damage or a repair can affect resistance; ask the repairer about sealing checks.

Read our guide to common device terms

Software and service compatibility

Google’s published minimum software-update date for Pixel Watch 4 is October 2028. This is the published minimum commitment, rather than a promise about individual future features. Checked on 21 November 2026. App availability and phone compatibility can change separately.

Common questions about the Pixel Watch 4

How do I identify my Pixel Watch 4?

Open Settings, then System and About, and read the model information. Regulatory Information provides the hardware marking. Match the complete G-code with this guide and record the case size and LTE or Bluetooth/Wi-Fi version. The serial number identifies one individual watch.

Which charger does Pixel Watch 4 need?

Use the Quick Charge Dock specified for this generation and a suitable USB-C power adaptor. Google lists different full-charge times for the two cases: about 45 minutes for 41 mm and 60 minutes for 45 mm. The dock design is different from the earlier Pixel Watch 2 and 3 charging cable.

Will Pixel Watch 4 work with an iPhone?

No. Google lists compatible Android 11.0 or newer phones for this generation, with a Google account and the Pixel Watch app. Check the current app and regional requirements before buying a watch for a particular phone.

Can Pixel Watch 4 use the same charger as Pixel Watch 3?

Pixel Watch 4 is specified for the Quick Charge Dock. Pixel Watch 3 uses the earlier fast charging cable with rear contact pins. Check the charger’s stated compatibility instead of choosing it only because it has a USB-C plug.

What is the published update-support period for Pixel Watch 4?

Google’s published minimum software-update date for Pixel Watch 4 is October 2028. This is the published minimum commitment, rather than a promise about individual future features. Checked on 21 November 2026. App availability and phone compatibility can change separately.

About this guide

Device details checked 21 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring