About Google. Google’s Pixel and earlier Nexus ranges include distinct generations, sizes and hardware versions. Keep the complete name and model code when comparing a device.

Explore Pixel Watch
Pixel Watch · Introduced 2022

Google Pixel Watch

The original Pixel Watch is Google’s 2022 smartwatch, with a 41 mm stainless-steel case and a rounded glass face. It comes in Bluetooth/Wi-Fi and LTE versions. Its charging cable and rear design differ from the later Pixel Watch 2, even though both use the same nominal case diameter.

UK & Ireland model numbers
GQF4CGBZ4S

Compare all listed model codes below.

Case
41 mm stainless steel
Storage
32GB
Charging
Magnetic cable

By WeSolveAll · Specifications checked 21 November 2026

Identify your watch

Pixel Watch model numbers

A model number identifies the model or hardware version and is shared by many devices. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model number

  1. On the watch, open Settings → System → About and record the model information.
  2. Open Settings → System → Regulatory Information to check the hardware marking.
  3. Match the complete G-code and case size. Keep the serial number and any LTE IMEI private; they identify the individual watch.

If the watch will not turn on: Check the original box, purchase record and visible case markings. Do not open the watch merely to identify it. A band colour can change and is not a reliable generation identifier.

Codes are checked against Google’s regulatory declarations. The table distinguishes case size and Bluetooth/Wi-Fi or LTE hardware. UK and EU declarations establish the preferred regional codes; imported watches can carry another listed code.

Swipe the table sideways on a narrow screen.

Model numberCase size or versionUseful detail
GQF4C41 mm Bluetooth/Wi-Fi; UK and EU declarationKeep the case size and connection type with this code; it is not a unique serial number.
GBZ4S41 mm LTE; UK and EU declarationKeep the case size and connection type with this code; it is not a unique serial number.
GWT9R41 mm LTE; US regulatory versionKeep the case size and connection type with this code; it is not a unique serial number.

A retail order number, band choice, serial number and IMEI are different from the watch’s hardware model code.

Recognise the finish

3 recorded colours

These are original case finishes, not a list of every interchangeable strap. Notes record size restrictions and selected original band combinations. Colour availability varied by size, region and sales period.

  • Matte Black

    Stainless-steel case; originally paired with an Obsidian band. On-screen colour is approximate; a replacement band does not change the case finish.

  • Polished Silver

    Stainless-steel case; originally paired with Chalk or Charcoal bands. On-screen colour is approximate; a replacement band does not change the case finish.

  • Champagne Gold

    Stainless-steel case; originally paired with a Hazel band. On-screen colour is approximate; a replacement band does not change the case finish.

Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Pixel Watch

Screen, case and controls

The first Pixel Watch combines a circular AMOLED screen with a rotating crown and a separate side button. A cracked glass surface, an image fault and a touch fault should be recorded separately. The steel case weighs 36 g without the band, so the lighter aluminium Pixel Watch 2 is a different hardware generation.

Charging and battery

Use the charging cable made for the first Pixel Watch. The magnetic puck uses a USB-C power connection; this does not mean a USB-C plug connects directly to the watch. A phone’s wireless charging pad is not a substitute for the specified watch charger.

Checks before a repair

Before requesting a repair, record whether the watch starts, responds to the crown and side button, pairs with its phone and charges on a known compatible cable. Check the screen and rear sensor cover for visible damage. Give the shop the G-code and describe the fault before assuming that a battery or screen replacement is available.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeaturePixel WatchWhat it means
Introduced2022The generation’s introduction year. The date of a later purchase does not create a new hardware generation.
Case sizes and material41 mm stainless steelCase size helps identify the hardware. A small or large wristband is a separate measurement.
Dimensions and weight41 × 41 × 12.3 mm; 36 g without bandWeight excludes the band. Match the case size when checking a screen, rear cover or battery.
ScreenAMOLED; up to 1,000 nitsPeak brightness is a test figure. It does not establish replacement-screen compatibility.
ProcessorExynos 9110; Cortex-M33 co-processorThe main processor and co-processor perform different tasks. Similar watch names do not mean identical internals.
Storage32GBBuilt-in space for apps and downloaded content; usable capacity is lower.
Memory (RAM)2GBWorking memory for running software, separate from content storage.
Battery capacity294mAh typicalOriginal typical capacity. Wear, charging history and settings affect the running time of a used watch.
Published battery lifeUp to 24 hours under Google’s test conditionsManufacturer test figures; enabled features, signal, temperature and battery age affect actual results.
Charging equipmentPixel Watch USB-C magnetic charging cableUSB-C describes the power end of the cable. The watch connection must match the correct generation.
Published charging timeAbout 45 minutes to 50%; about 110 minutes to fullApproximate test results with compatible equipment. These are not a diagnosis of battery condition.
Bluetooth and Wi-FiBluetooth 5.0; 2.4GHz Wi-FiNearby phone pairing and Wi-Fi are separate from an LTE mobile subscription.
Mobile networkBluetooth/Wi-Fi and LTE versions; eSIM on LTE hardwareA compatible network and service plan are required for cellular features. Confirm imported hardware with the operator.
Controls and audioRotating crown, side button, microphone and speakerTest the controls and audio separately when recording a fault.
Launch softwareWear OS 3.5This is the launch system, not a statement of the latest version installed on every watch.
Paired phoneCompatible Android 8.0 or newer; Google account and Pixel Watch appGoogle does not support pairing these watches with an iPhone. Check app and regional requirements for the intended phone.
Published water/dust rating5ATMA rating describes controlled tests. Age, damage or a repair can affect resistance; ask the repairer about sealing checks.

Read our guide to common device terms

Software and service compatibility

Google’s published minimum software-update date for Pixel Watch is October 2025. That minimum period has elapsed; check the installed security update and available software before relying on continued updates. Checked on 21 November 2026. App availability and phone compatibility can change separately.

Common questions about the Pixel Watch

How do I identify my Pixel Watch?

Open Settings, then System and About, and read the model information. Regulatory Information provides the hardware marking. Match the complete G-code with this guide and record the case size and LTE or Bluetooth/Wi-Fi version. The serial number identifies one individual watch.

Which charger does Pixel Watch need?

Use the charging cable made for the first Pixel Watch. The magnetic puck uses a USB-C power connection; this does not mean a USB-C plug connects directly to the watch. A phone’s wireless charging pad is not a substitute for the specified watch charger.

Will Pixel Watch work with an iPhone?

No. Google lists compatible Android 8.0 or newer phones for this generation, with a Google account and the Pixel Watch app. Check the current app and regional requirements before buying a watch for a particular phone.

Is the first Pixel Watch the same as Pixel Watch 2?

No. Both have a 41 mm case, but the first model uses stainless steel and an Exynos processor. Pixel Watch 2 uses aluminium, a different processor and a contact-pin charger. Confirm the generation before buying charging equipment or repair parts.

What is the published update-support period for Pixel Watch?

Google’s published minimum software-update date for Pixel Watch is October 2025. That minimum period has elapsed; check the installed security update and available software before relying on continued updates. Checked on 21 November 2026. App availability and phone compatibility can change separately.

About this guide

Device details checked 21 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring