About Google. Google’s Pixel and earlier Nexus ranges include distinct generations, sizes and hardware versions. Keep the complete name and model code when comparing a device.

Explore Pixel Watch
Pixel Watch · Introduced 2026

Google Pixel Watch 5

Pixel Watch 5 is the 2026 generation, offered in 41 mm and 45 mm aluminium cases. It retains the Actua 360 display and Quick Charge Dock while adding the accelerated W5 Gen 2 platform and 64GB of storage. Case finish, size and LTE capability are separate choices.

UK & Ireland model numbers
G1XJ6G0F3YGFW3RG25QD

Compare all listed model codes below.

Case
41 mm or 45 mm aluminium
Storage
64GB
Charging
Quick Charge Dock

By WeSolveAll · Specifications checked 21 November 2026

Identify your watch

Pixel Watch 5 model numbers

A model number identifies the model or hardware version and is shared by many devices. Serial numbers and mobile-network identifiers such as IMEI or MEID belong to an individual device.

Where to find your model number

  1. On the watch, open Settings → System → About and record the model information.
  2. Open Settings → System → Regulatory Information to check the hardware marking.
  3. Match the complete G-code and case size. Keep the serial number and any LTE IMEI private; they identify the individual watch.

If the watch will not turn on: Check the original box, purchase record and visible case markings. Do not open the watch merely to identify it. A band colour can change and is not a reliable generation identifier.

Codes are checked against Google’s regulatory declarations. The table distinguishes case size and Bluetooth/Wi-Fi or LTE hardware. UK and EU declarations establish the preferred regional codes; imported watches can carry another listed code.

Swipe the table sideways on a narrow screen.

Model numberCase size or versionUseful detail
G1XJ641 mm Bluetooth/Wi-FiKeep the case size and connection type with this code; it is not a unique serial number.
G0F3Y41 mm LTEKeep the case size and connection type with this code; it is not a unique serial number.
GFW3R45 mm Bluetooth/Wi-FiKeep the case size and connection type with this code; it is not a unique serial number.
G25QD45 mm LTEKeep the case size and connection type with this code; it is not a unique serial number.

A retail order number, band choice, serial number and IMEI are different from the watch’s hardware model code.

Recognise the finish

4 recorded colours

These are original case finishes, not a list of every interchangeable strap. Notes record size restrictions and selected original band combinations. Colour availability varied by size, region and sales period.

  • Matte Black

    Both aluminium case sizes; Obsidian Active Band (2nd gen). On-screen colour is approximate; a replacement band does not change the case finish.

  • Polished Silver

    Both case sizes; Fog Active Band (2nd gen). On-screen colour is approximate; a replacement band does not change the case finish.

  • Champagne Gold

    41 mm aluminium case; Canyon Active Band (2nd gen). On-screen colour is approximate; a replacement band does not change the case finish.

  • Satin Pyrite

    Both case sizes; Olive Active Band (2nd gen). The US Stephen Curry edition pairs the 45 mm case with a Rye Performance Loop band. On-screen colour is approximate; a replacement band does not change the case finish.

Use the colour and the model number together. Lighting, screen settings, cases and replacement backs can change how a device looks.

In everyday language

Getting to know the Pixel Watch 5

Screen, case and controls

The Actua 360 display uses a domed glass surface and an LTPO AMOLED panel. The two case sizes share the generation name but have different battery capacities. The 41 mm Champagne Gold finish and the 45 mm Stephen Curry band edition should not be mistaken for separate generations or universal part-fit references.

Charging and battery

The watch charges on the Google Pixel Watch Quick Charge Dock. The 41 mm version has a 332mAh typical battery and the 45 mm version a 465mAh typical battery. Those figures describe original capacity; they do not report the health of a used watch. Inspect charging behaviour with equipment compatible with the exact generation.

Checks before a repair

Confirm whether the case is 41 mm or 45 mm and whether its G-code denotes LTE or Bluetooth/Wi-Fi. Describe screen, touch, crown, side-button and charging faults individually. Ask which parts and post-repair checks are included in a quote. Band colour, software edition and storage labels alone are not enough to choose a replacement component.

The detail, explained

Specifications and what they mean

Read each specification alongside its explanation. Manufacturer test figures describe controlled conditions; age, usage and battery condition affect everyday performance.

Swipe the table sideways on a narrow screen.

FeaturePixel Watch 5What it means
Introduced2026The generation’s introduction year. The date of a later purchase does not create a new hardware generation.
Case sizes and material41 mm or 45 mm aluminiumCase size helps identify the hardware. A small or large wristband is a separate measurement.
Dimensions and weight41 mm: 31 g; 45 mm: 36.7 g; both 12.3 mm thick, without bandWeight excludes the band. Match the case size when checking a screen, rear cover or battery.
ScreenActua 360 LTPO AMOLED; 1–60Hz; up to 3,000 nitsPeak brightness is a test figure. It does not establish replacement-screen compatibility.
ProcessorQualcomm Snapdragon W5 Gen 2 Accelerated; Cortex-M55 co-processorThe main processor and co-processor perform different tasks. Similar watch names do not mean identical internals.
Storage64GBBuilt-in space for apps and downloaded content; usable capacity is lower.
Memory (RAM)50% more RAM than Pixel Watch 4Working memory for running software, separate from content storage.
Battery capacity41 mm: 332mAh; 45 mm: 465mAh, typicalOriginal typical capacity. Wear, charging history and settings affect the running time of a used watch.
Published battery lifeAlways-on: up to 30 hours (41 mm) or 40 hours (45 mm)Manufacturer test figures; enabled features, signal, temperature and battery age affect actual results.
Charging equipmentGoogle Pixel Watch Quick Charge DockUSB-C describes the power end of the cable. The watch connection must match the correct generation.
Published charging timeTo full: about 45 minutes for 41 mm; about 60 minutes for 45 mmApproximate test results with compatible equipment. These are not a diagnosis of battery condition.
Bluetooth and Wi-FiBluetooth 6.0; 2.4GHz and 5GHz Wi-FiNearby phone pairing and Wi-Fi are separate from an LTE mobile subscription.
Mobile networkBluetooth/Wi-Fi and LTE versions; eSIM on LTE hardwareA compatible network and service plan are required for cellular features. Confirm imported hardware with the operator.
Controls and audioRotating crown, side button, microphone and speakerTest the controls and audio separately when recording a fault.
Launch softwareWear OS 7.0This is the launch system, not a statement of the latest version installed on every watch.
Paired phoneCompatible Android 12.0 or newer; Google account and Pixel Watch appGoogle does not support pairing these watches with an iPhone. Check app and regional requirements for the intended phone.
Published water/dust rating5ATM and IP68A rating describes controlled tests. Age, damage or a repair can affect resistance; ask the repairer about sealing checks.

Read our guide to common device terms

Software and service compatibility

Google’s published minimum software-update date for Pixel Watch 5 is October 2029. This is the published minimum commitment, rather than a promise about individual future features. Checked on 21 November 2026. App availability and phone compatibility can change separately.

Common questions about the Pixel Watch 5

How do I identify my Pixel Watch 5?

Open Settings, then System and About, and read the model information. Regulatory Information provides the hardware marking. Match the complete G-code with this guide and record the case size and LTE or Bluetooth/Wi-Fi version. The serial number identifies one individual watch.

Which charger does Pixel Watch 5 need?

The watch charges on the Google Pixel Watch Quick Charge Dock. The 41 mm version has a 332mAh typical battery and the 45 mm version a 465mAh typical battery. Those figures describe original capacity; they do not report the health of a used watch. Inspect charging behaviour with equipment compatible with the exact generation.

Will Pixel Watch 5 work with an iPhone?

No. Google lists compatible Android 12.0 or newer phones for this generation, with a Google account and the Pixel Watch app. Check the current app and regional requirements before buying a watch for a particular phone.

Is the Stephen Curry Pixel Watch 5 a different size or generation?

It is a US special edition of the 45 mm Pixel Watch 5, pairing a Satin Pyrite case with a Rye Performance Loop band. Use the watch’s hardware code and 45 mm case size for identification; the band edition is recorded as a variant within this generation.

What is the published update-support period for Pixel Watch 5?

Google’s published minimum software-update date for Pixel Watch 5 is October 2029. This is the published minimum commitment, rather than a promise about individual future features. Checked on 21 November 2026. App availability and phone compatibility can change separately.

About this guide

Device details checked 21 November 2026. Regional features, software availability and colours can vary. Pictures are visual guides; colours and small details are approximate.

Keep exploring